home • about us • contact

> ecosystem

HVAC, lighting and metering
For buildings of all sizes

with...
Wired and wireless control
Wired and wireless networking
EnOcean & ZigBee
BACnet, Modbus & CANbus
BACnet IP integration
Web-based BEMS

Wireless ecosystem sample

CAN2GO controllers and gateways can control a large variety of wired and wireless end devices for multiple applications. Below is a sample of the wireless products that SCL Elements has tested with CAN2GO products. This is to give you an idea of the possibilities that CAN2GO products create for your energy efficiency projects, and is by no means of complete list of compatible end devices. Many more end devices have already been used by system integrators with CAN2GO.

If the wireless end devices you are using for a project are not listed below, contact us and we will verify interoperability with CAN2GO. Third party end devices that use open wireless standards EnOcean and ZigBee are usually compatible.

HVAC, Lighting, Occupancy, Metering and other applications
Thermostats Valve Actuators Carbon Dioxide Sensors HVAC Components Switches & Key Cards Relays	Switches & Relays Light Sensors Motion Sensors Contact Sensors ZigBee Sevices Pulse meter / Digital input Modbus Devices

 

Thermostats

These devices are used to get the current space temperature for a specific zone. They can optionally provide user-specified setpoint(s) for improved comfort, and occupancy/override button(s) to force the HVAC and lighting system(s) into "occupied" mode.

On some devices, the setpoint adjustment can be seen by the user in temperature degrees (written on the RW-TP01 knob, or shown on the ERT-STAT LCD and Lutuo LTTA bi-stable displays). On other devices, the setpoint is only seen as more or less (warmer or cooler), so the user only adjusts the setpoint in a specific band.

An optional fan speed setting is available on some models, providing a range such as "auto/low/mid/high" for the fan stages control. Most of these devices are truly batteryless, using light harvesting, including the Lutuo LTT which has a bi-stable display (it does not require power unless it changes). But on the wired models (such as the ERT-STAT), built-in control relays already require high power, so no energy harvesting module is present.

Device Features	Regulvar RW-TP01	Thermokon SR04 Echoflex SR04 Illumra SR04 AdHoc E3T-SR04	EchoFlex MT-17	Leviton WS0TH EchoFlex ERT-STAT Illumra E3X-T02	Lutuo LTTA
EnOcean	315/868MHz	315/868MHz	315/868MHz	315/868MHz	315/868MHz
Batteryless	Yes	Yes	Yes	No	Yes
Temperature	Yes	Yes	Yes	Yes	Yes
Setpoint	Yes	Optional	Optional	Yes	Yes
Switch	Yes	Optional	Optional	Yes	Yes
Fan Speed	No	Optional	No	Yes	Yes
Light	No	Optional	No	No	Yes
Humidity	No	Optional	No	No	No
CO2	No	Optional	No	No	No
Relay	No	No	No	Yes	No
Display	No	No	No	Yes	Yes

Device Features	Thermokon SR65
	Outside temperature sensor Range -20 ... +60degC

---

Valve Actuators

These devices can control a remote valve, either using a direct command (0 to 100 percent) or even using a temperature setpoint to let it adjust the opening automatically based on its own zone temperature.

Device Features	Spartan ME8300	Kieback & Peter MD15-FTL Illumra E3X-VAVTP	Thermokon SAB01
EnOcean	315/868MHz	315/868MHz	315/868MHz
Power Supply	Wired (24VAC 50/60Hz)	3 Alkaline AA Batteries	2 Alkaline AA Batteries

---

Carbon Dioxide Sensors

These devices detect the carbon dioxide (CO2) ambient concentration (in ppm), along with temperature and humidity (optional), then wirelessly report their readings at fixed time intervals.

Device Features	Thermokon SR04 CO2	Ecologix Eco CO2
EnOcean	315/868MHz	315/868MHz
Power Supply	15-24VDC or 24VAC	Energy harvesting (solar)
Accuracy	Measures Temperature, humidity and CO2	±50 ppm +/- 3% of reading
Options	LCD Display Temperature Humidity

---

HVAC Components

These devices can control remote air conditioners and heaters, either using direct commands or setpoint adjustments. They can also provide feedback on their current status and various readings.

Device Features	Intesis ME-AC-ENO1	Verve VHSM Setback Module
EnOcean	315/868MHz	Dry contact closure provides input signal to HVAC systems for switching between setback mode and normal operation Power Supply 9VAC - 30VAC, 120VDC - 45VDC Outputs One (1) isolated normally open relay contact
Power Supply	Wired (provided by A/C)
Temperature	Celsius or Fahrenheit
Setpoint	Celsius or Fahrenheit
State	On or Off
Mode	Auto, Heat, Cool, Fan or Dry
Fan Speed	Auto, Low, Mid 1/2 or High
Air Direction	Auto, Horizontal, Pos 1/2/3, Vertical or Swing

---

Switches & Key Cards

These simple devices provide on/off information through rocker switches. The push buttons usually give only one information (pressed or released) but the rocker switches provide both the on/off state (up/down positions) and the pressed/released condition.

Device Features	Leviton WSS0S-D0W EchoFlex PTM265 Illumra E3T-S1A Leviton WSS0S-E0W Illumra E3T-S1E	Leviton WSS0S-D2W EchoFlex PTM265D Illumra E3T-S2A Leviton WSS0S-E2W Illumra E3T-S2E	Illumra 2-Gang Illumra 3-Gang	Leviton WSS0S-R0W EchoFlex PTM HHO Illumra E3T-S2H	Leviton WSS0S-H0W EchoFlex PTM265KCA Illumra E3T-C1AWH
EnOcean	315/868MHz	315/868MHz	315/868MHz	315/868MHz	315/868MHz
Type	Single Rocker	Dual Rocker	Multi Rocker	Hand Held	Key Card

---

Relays

These devices allow the remote control of any powered element, such as: lights, fans, heaters, coolers, and more. They are available in different formats, supporting various voltages, power levels and number of wires.

Device Features	Leviton WSG0S-S1T Illumra E3R-R12GP	Leviton WSP05 Leviton WST05 EchoFlex ER1C-DF Echoflex ERM-DLC-277 Verve X2101E03W3VN	Leviton WSD-01
EnOcean	315/868MHz	315/868MHz	0-10V dimming relay. Output rating : 4mA, 0-10V Output.
Enclosure	External Plug-In	Wired or Threaded-Mount
Dimmer	Leviton WSG0S-D1T Illumra E3R-D12GP	Illumra E3X-D02FP for 28VDC LED Illumra E3X-D01FP for 10VDC
EnOcean	315/868MHz	315/868MHz
Power	120V: 500W or 1500W Dimmable: 300W	24VAC: 100W or 300W 120V: 500W or 1500W 240V: 1000W or 3000W 277V: 1200W or 3200W
Wires	None	3-Wire or 5-Wire

---

Switches & Relays

These devices combine a switch and a relay in a single convenient package, and are powered using the same source as their controlled output. They can replace existing wired wall switches, effectively allowing both the user and the building management system to access the controlled resources.

Device Features	Leviton WSS10-DW Leviton WSS10-DZ
EnOcean	315/868MHz
Type	Push Button

---

Light Sensors

These devices report the ambient light level (in lux). They can both be used to check if the ceiling lights are on (for room occupancy detection) and to verify if the current illumination level is sufficient. For instance, a room controller could adjust the window shades and the lighting fixtures based on the external sun light reading.

Device Features	EchoFlex TAP-17	Leviton WSCPC Illumra E3T-SLICP	Thermokon SR65 LI
EnOcean	315/868MHz	315/868MHz	Outdoor light sensor. Light Level: 300-30000 lux or 600-60000 lux
Buttons	Teach-In	Occupied Teach-In Unoccupied

---

Motion Sensors

These devices send a telegram whenever movement is detected in their range, allowing for a simple room occupancy detection.

Device Features	Leviton WSC04-I0W Illumra E3T-SB24	Leviton WSC04-IRW Illumra E3T-RB24	EchoFlex MOS-17	Verve VOSM	Thermokon SR-MDS
EnOcean	315/868MHz	315/868MHz	315/868MHz	315MHz
Type	Passive Infrared	Passive Infrared	Passive Infrared	Passive Infrared	Passive Infrared
Range	450 square feet 1500 square feet	450 square feet 1500 square feet	1500 square feet	180 degree viewing angle, detection range 80ft. (25m)	SR-MDS BAT: battery-powered SR-MDS 24V: power supply 24V AC/DC SR-MDS Mains power supply 80...240V Measuring range 0...512Lux

---

Contact Sensors

These devices can detect if a window or door is either closed or open. The room heating and cooling can hence be adjusted accordingly. For instance, when a window is opened, the heating/cooling and ventilation could all be turned off.

Device Features	EchoFlex MC-17 Illumra E3T-MDCCP
EnOcean	315/868MHz
Type	Magnet Contact

---

ZigBee Devices

These devices provide a combination of readings for different ambient measurements (such as light, temperature, and humidity).

Device Features	Digi ZB LTH Sensor XS-Z16-CBxR	Digi ZB Wall Router XR-Z14-CW1P1	Digi ZB Smart Plug XR-Z14-CW2P6	Digi ZB IO Adapter XA-Z16-CSxRL
ZigBee	2.4GHz	2.4GHz	2.4GHz	2.4GHz
Power Supply	3 Alkaline AA Batteries	Wired 85-265VAC 50/60Hz	Wired 120VAC 60Hz	Wired 3-6VDC or Lithium Batteries
Light	Yes	Yes	Yes	No
Temperature	Yes	Yes	No	No
Humidity	With or Without	No	No	No
Current	No	No	Yes (0-8A)	No
Custom I/O	No	No	No	4 Analog or 4 Digital

---

Pulse Meter / Digital Input

Device Features	Ecologix EcoWPS	Ecologix Eco Smart Appliance	Thermokon SR65 DI
Notes	EnOcean: 315/868MHz Meter Pulse Sender Optical or Wired Pulse reader Power Supply: Type Lithium Ion Battery Battery life 6 years Sample Rate: Event or Time based • 100sec • 200sec • 600sec	Smart Plug	Power Supply: 3.6V battery type LS14250 Sample Rate: Event or Time based • 100sec • 1000sec • 10000sec

---

Modbus Devices

These devices are wired using the RS-485 Modbus protocol. They provide various inputs and outputs to complement the controllers capabilities.

Device Features	Temco T3 IO Modules	Accuenergy Acuvim-L Energy/Power Meter
Modbus	RS-485 RTU	RS-485 RTU
I/O Points	8 Analog Inputs (0-5VDC) 13 Binary Outputs (120V/1A)	Frequency Phase Voltage V1, V2, V3 Line Voltage V12, V23, V31 Phase Line Current I1, I2, I3 Neutral Line Current In Phase Power Pa, Pb, Pc Phase Reactive Power Qa, Qb, Qc System Reactive & Apparent Power System Power Psum, PFsum Phase Power Factor PFa, PFb, PFc Voltage & Current Unbalance Factor Phase Apparent Power Sa, Sb, Sc Power Demand, Apparent, Reactive Current Demand Phase A, B, C

Case studies

Read our case studies to see other examples of end devices used with CAN2GO.